| TechnicalData |
DQ5072 |
DQ5102 |
DQ5202 |
| Display |
| Type |
7″ rectangle color LCD |
| Display resolution |
800 horizontal×480 vertical pixels |
| Display contrast |
Adjustable |
| VERTICAL SYSTEM |
| Sensitivity and accuracy |
2mV / div~10V / div |
| Vertical resolution |
8 bit |
| Width of band (-3dB) |
70MHz |
100MHz |
200MHz |
| Rise time |
≤5ns |
≤3.5ns |
≤1.7ns |
| Sing-shot band width |
70MHz |
100MHz |
200MHz |
| Input coupling |
DC , GND , AC |
| DC gain accuracy |
±3% (10mV/div~5V/div), ±4% (2mV/div~5mV/div) |
| HORIZONTAL SYSTEM |
| SEC/DIV range |
4ns/div~80s/div |
4ns/div~80s/div |
2ns/div~80s/div |
| Sampling rate range |
1G Sa/s |
| Wave forn interplation |
(Sinx)/x |
| Record length |
40k |
| Memory length |
25k (12.5k per channel) |
Sampling rate and delay
Time accuracy |
±50ppm over any ≥1ms time interval |
Delta time Measurement
accuracy |
Single ± (1 sampling interval time+ 100ppm x rdg +0.6ns)
Average ± (1 sampling interval time+ 100ppm x rdg +0.4ns) |
| TRIGGER SYSTEM |
| Acquisition Mode |
AUTO, Normal, Single |
| Type |
Edge, Pulse Width, Video, Slope, Overtime, Alternate trigger |
| Hold Off Range |
100ns~10s |
| MATH |
＋, －, ×, ÷ |
| FFT |
| ACQUIRE INPUT |
| Input couping |
DC、AC or GND |
| Input impedance |
1MΩ±2% 20pF±3pF |
| Probe attenuation |
1x、10x、100x、1000x |
| Max.input voltage |
300V (DC+AC peak, 1MΩ) Voltage difference (△V) between cursors |
| MEASUREMENT |
| Cursor |
Time difference (△T) between cursors |
| Reciprocal of △T in Hz (1/△T) |
| AUTO-Mesure |
Frequency,Period,Mean,Pk-Pk,Cycil RMS,Min.,Max.,Rise time,Fall time,+Pluse width, -Pulse width,Delay1-2Rise,Delay1-2Fall,+Duty,-Duty,Vbase,Vtop,Vmid,Vamp, Overshoot,Preshoot,Preiod Mean,Preiod RMS,FOVShoot,RPREShoot,BWIDTH, FRF,FFR,LRR,LRF,LFR,LFF |
| I/O |
| Standard |
USB(H) |
| CALIBRATOR SIGNAL |
| Output Voltage |
5V (≥1MΩ load) |
| Output Frequency |
1 kHz |
| POWER SOURCE |
100~120V, 45Hz~440Hz; 121~ 240V, 45Hz~66Hz; 30VA Max; CAT Ⅱ |
| ACCESSORIES |
Operation manual, power cord, USB cable, probe×2, software CD-ROM |
| DIMENSIONS & WEIGHT |
313(W) × 108(H) × 142(D)mm, 2kg |
